Anjos, Marcos Alyssandro Soares dosNunes, Gabrielly da Mota2023-04-172023-04-172023-02-10NUNES, Gabrielly da Mota. Avaliação do comportamento mecânico de misturas 3DCP com substituição parcial do cimento por fíler calcário e metacaulim em comparação aos materiais para alvenaria estrutural. Orientador: Marcos Alyssandro Soares dos Anjos. 2023. 90f. Dissertação (Mestrado em Engenharia Civil e Ambiental) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2023.https://repositorio.ufrn.br/handle/123456789/521853D printing has generated changes in traditional processes, ensuring improvements in construction efficiency and productivity. However, few studies focus on the analysis of 3D printing cementitious mixtures (3DCP) in large pieces with the wall typology in a comparative way to conventional construction systems and, still, make use of high cement content to achieve the required structuring. Based on this, the present study aims to develop blocks, prisms and mini-walls with 3DCP mixtures with limestone filler and metakaolin as partial replacement for Portland cement, aiming to evaluate the mechanical behavior of these 3DCP elements compared to the reference mixture, only with cement, and the structural masonry system with concrete hollow blocks. The mixtures constituted up to 50% of cement replacement by lime filler and metakaolin and were also analyzed for their performance in the fresh and hardened state. The results showed that the blocks, prisms and mini-walls produced with 3DCP mixtures with cement replacement by limestone filler and metakaolin showed lower compressive strength compared to the reference mixture, with cement only, and higher result compared to the structural masonry components with concrete hollow block. The 3DCP mixtures with limestone filler and metakaolin showed better efficiency indexes in relation to cement consumption per MPa achieved, which proves the efficiency of mixtures with filler and metakaolin in the ability to build walls to withstand the usual efforts of sealing and structural masonry.Acesso AbertoImpressão 3D em concretoBloco 3DCPPrisma de alvenariaMiniparede 3DCPMateriais cimentícios suplementaresmasterThesisCNPQ::ENGENHARIAS::ENGENHARIA CIVIL