Pedroza, Marcelo MendesVieira, Gláucia Eliza GamaSousa, João Fernandes de2021-09-272021-09-272011-12-02Pedroza, M. M. ; Vieira. G. E. G. ; SOUSA, J. F.. Características Químicas de Lodos de esgotos Produzidos no Brasil. Revista AIDIS de Ingeniería y Ciencias Ambientales, v. 4, p. 35-47, 2011. Disponível em: http://www.journals.unam.mx/index.php/aidis/article/view/4. Acesso em: 27 set. 2021. http://dx.doi.org/10.22201/iingen.0718378xe.2011.4.2.286580718-378Xhttps://repositorio.ufrn.br/handle/123456789/39569This study aimed to determine the chemical characteristics of domestic sludge produced in Brazil. The samples were collected in beds of dry sewage treatment plant. The waste sludge LD‐1 and LD‐10 were typically anaerobic sludge sample and LD‐6 was a mixed sludge, rich in ferric chloride. LD‐1 and LD‐6 showed a moisture content of 12.0 and 11.5%, respectively. The highest ash content was observed in the sample LD‐six (46.2%). The lower concentration of organic matter was detected in LD‐6 (40.6%), because it is rich in ferric chloride sludge. LD‐10 had the highest carbon content (27.0%). The main metals found in sludge sample LD‐1 were iron, zinc, manganese, lead, copper, nickel and chromium. The total iron showed the highest concentration (28,911 mg/kg). Nickel has the lowest of them (24 mg/kg). All metals determined in the sludge LD‐1 had concentrations below the limits set for agricultural use by the Brazilian resolution. The main functional groups detected in the sludge, through FTIR, were alcohol, carboxylic acid, amides, amines, phenols, hydrocarbons and silicates. The sludge appear in their chemical composition, various substances such as nucleic acids, proteins, carbohydrates, lipids, humic substances and cellulose. These compounds have a very high potential energy to be treated as mere waste. This potential can be transformed from waste to raw material, in thermal processes of incineration and pyrolysisAttribution 3.0 Brazilhttp://creativecommons.org/licenses/by/3.0/br/Metais pesadosMineraisAnálise químicaGrupos funcionaisLodo de esgotoarticle10.22201/iingen.0718378xe.2011.4.2.28658