Navegando por Autor "Rodrigues, Daniela S."
Agora exibindo 1 - 1 de 1
- Resultados por página
- Opções de Ordenação
Artigo Mechanical strength and wear of dental glass-ionomer and resin composites affected by porosity and chemical composition(Springer Link, 2015-08-13) Rodrigues, Daniela S.; Buciumeanu, Mihaela; Martinelli, Antonio Eduardo; Nascimento, Rubens Maribondo do; Henriques, Bruno; Silva, Filipe Samuel; Souza, Júlio César Matias deThe main aim of this study was to evaluate the influence of porosity, microstructure, and chemical composition on the wear and compressive strength of dental glass-ionomer or resin composite. Cylindrical samples (6 9 4 mm) were prepared from a nano-hybrid resin composite (GrandioSO/RC, VOCO), a resin-modified glass ionomer (VitremerTM/VI, 3 M-ESPE) and a conventional glass ionomer (IonofilMolar/CO, VOCO). Porosity and topography of the materials were evaluated by optical and scanning electron microscopy (SEM). Roughness was evaluated by Ra and Rt parameters at 0.1 mm/s under cutoff of 0.8 mm. Then, compressive tests were performed at 1 mm/min. Wear tests were carried out at 20 N, 2.5 mm of displacement, at 1 Hz for 90 min in artificial saliva solution. The results were statistically analyzed with a one-way ANOVA and Tukey’s test (p\0.05). Resin composite revealed a significantly lower porosity (1.21 ± 0.20 %) than glass-ionomer restoratives (5.69–7.54 %) as well as lower values of Ra and Rt roughness (p\0.05). Also, resin composite showed significantly higher values of mechanical strength (334 ± 15.9 MPa) compared to conventional (78.78 ± 13.30 MPa) or modified glass ionomer (169.50 ± 20.98 MPa) (p\0.05). For maximal depth of wear, resin composite also showed significantly lower values than glass ionomer (p\0.05). Homogeneous wear morphology was noticed by SEM analyses on glass ionomers in opposition to resin composite. Glass ionomers showed a poor mechanical behavior associated to a high porosity and wear rate when compared to resin composite.